Cisco 2800 series router password recovery
http://www.ciscosystemsverified.biz/en/US/products/hw/routers/ps259/products_password_recovery09186a0080094675.shtml
If you get a router off of EBay or your favorite local reseller lets you borrow one until you are able to purchase a new one as part of a VOIP project, then you will have to blow away the current config in order to get it in a state that you can actually use. The above article will walk you through how to do this. One thing you will want to pay particularly close attention to is that once you have set up your config, do not forget to set the config register back so that the router will reboot into the config you have set up:
config-register 0x2102
Once that is done, then you can reboot the router normally and it will boot your new config.
If you get a router off of EBay or your favorite local reseller lets you borrow one until you are able to purchase a new one as part of a VOIP project, then you will have to blow away the current config in order to get it in a state that you can actually use. The above article will walk you through how to do this. One thing you will want to pay particularly close attention to is that once you have set up your config, do not forget to set the config register back so that the router will reboot into the config you have set up:
config-register 0x2102
Once that is done, then you can reboot the router normally and it will boot your new config.
posted by Rick Mitchell Solutions @ 7:11 PM
0 Comments:
Post a Comment
Subscribe to Post Comments [Atom]
Links to this post:
Create a Link
<< Home